In this report we’re going to look at how to make your own dog mask. We’ll cover the basics and then go on to look at a number of the more advanced tips and techniques that you can use.

If you have a dog that likes to bark, and especially if your dog loves to play in the backyard and other regions of the home, you need to get them some particular dog protection.

Paper Plate 3d Dog Mask DIY Materials: This is the first part of the setup which will look a little scary at first, but it is actually quite simple. All you’ve got to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can’t just cut a rectangular shape from the cardboard, so you will need to cut around the edge of the mask so you get something which resembles a cone. The main thing here is to be realistic with what type of paper plate that you’re using.

Then you will have to wrap the cardboard around the edges of the paper plate, making sure that there is a good seal between the two pieces so that you can make certain that nothing will leak when you place the mask on. Be sure the edges are cut so the edges are not sharp, as this may damage the edges of the mask.

Glue it on! The next step involves using some paint. You ought to spray the paint over the cardboard, making sure that it runs smoothly and evenly across the entire mask. You’ll want to start with one side of the mask , so that you can work your way around it before moving onto the other side. The paint has to be slightly thicker than the cardboard, and it’s best that you leave about one-third of an inch of paint on the edges so that it runs across the cardboard.

Don’t fret too much about the paint getting stuck to your mask. It’s easy to remove it later, and it will leave you with a nice finished mask to show off to everybody! It’s also a good idea to wipe away any excess paint after you are done, so that you don’t end up with smudges or smears on your dog.

Then it’s time to paste the mask onto your dog’s head. First you need to make sure that you get a secure fit between the mask and your dog’s head. As soon as you’ve made sure that it’s secure, then you can start to glue the mask on the dog’s face. Take the piece of cardboard that is used for the base of the mask and fold it over. Be sure that it’s quite powerful and then use your hands to secure the cardboard down here in place.

Keep your hands out of the way and use tape to hold it in place as you repeat the process on the cardboard folds till you’ve got the mask snugged firmly onto the surface of your dog. Don’t make the folds too big or else it might look messy. As soon as you’ve done this, you can then take out the mask and then attach the cardboard ears. And attach the other part of the mask on the dog. Be sure that the ears are flat and be certain it’s not too short or long as this can cause some issues with the mask slipping off the dog’s face.

If you’re using a dog mask because your dog protection, you’ll have to do some sanding to be certain it’s safe on your dog. You can do this by sanding off any excess paper that may have been removed from your mask.